Supported Environments For Qfx Series Devices; Table 5: Supported Qfx And Ex Series Switches Configurations - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Related
Documentation

Supported Environments for QFX Series Devices

Table 5: Supported QFX and EX Series Switches Configurations

Platform Element Standalone
EX4300
Initial software 13.2X50-D10
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
EX4600
14
keep the QFX5100 switch within the desired temperature thresholds, chassis alarms
occur and the QFX5100 switch can shut down.
AC Power Supply for a QFX5100 Device on page 47
DC Power Supply in a QFX5100 Device on page 49
Cooling System and Airflow in a QFX5100 Device on page 39
QFX Series switches can operate:
Standalone
In a QFabric system (QFX3000-G and QFX3000-M)
In a QFX Virtual Chassis
In a Virtual Chassis Fabric with QFX and EX Series switches
In a Junos Fusion system
Table 5 on page 14 shows which QFX and EX Series switches operate standalone or can
operate together in a mixed environment as a QFabric System, QFX Virtual Chassis, or
Virtual Chassis Fabric. For information about the software features available on each of
these platforms and releases, see
QFX3000-G QFX3000–M
14.1X53-D40 14.1X53-D40
clos clos
Supported Supported
as a control as a control
plane device plane device
only. only.
.
Feature Explorer
QFX Virtual Virtual Chassis
Chassis Fabric
13.2X50-D10 13.2X51-D20
ring spine and leaf
10 16 out of 20
leaf mode only
NOTE: Use
QFX5100-24Q as
spine.
Min: 2 out of 20
Max: 4 out of 20
Copyright © 2016, Juniper Networks, Inc.
Junos Fusion
14.1X53-D16
spine and leaf
satellite mode
only
Max: 64 satellite
devices