Figure 17: Qfx5100-48T Switch Port Panel - Juniper QFX5100 Hardware Manual

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.

Figure 17: QFX5100-48T Switch Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10GBASE-T ports (48)
The QFX5100-48T device ports, (
QFX5100-48T 40 G uplink or data ports (
QSFP+ transceivers
SFP+ transceivers
QSFP+ to QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ DAC breakout cables (DACBO)
QSFP+ to QSFP+ active optical cables (AOC)
QSFP+ to SFP+ AOC breakout cables (AOCBO)
To connect a QFX5100-48T switch as a Node device in a QFabric system, you need:
Four QSFP+ uplink ports on each QFX5100-48T Node device to connect to the data
plane network through the QFX3008-I or QFX5100-24Q Interconnect devices.
The two remaining QSFP+ uplink ports on each QFX5100-48T Node device connect
to the data plane network through the QFX3008-I or QFX5100-24Q Interconnect
devices. See "Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the
QFX Series" on page 94.
Access port pinouts for the QFX5100-48T switch are the same as the management port
connector pinouts for the QFX Series. For more information, see
Connector Pinouts for the QFX Series" on page
Access Port and Uplink Port LEDs on a QFX5100 Device on page 57
Field-Replaceable Units in a QFX5100 Device on page 12
Port Panel of a QFX5100-24Q Device on page 23
Port Panel of a QFX5100-48S Device on page 28
Port Panel of a QFX5100-96S Device on page 32
Installing and Removing QFX5100 Device Hardware Components on page 201
Connecting QFX Series Switches in a Virtual Chassis
Connecting a QFX5100 Device in a Virtual Chassis Fabric on page 187
Management Port Connector Pinouts for the QFX Series on page 85
Chapter 2: Chassis Components and Descriptions
3— 40 GbE ports (6)
through ) support RJ45 connectors. The
0 47
through ) support:
48 53
85.
"Management Port
31