Juniper QFX5100 Hardware Manual page 141

Table 39: Interface Support for 40-Gigabit Ethernet QSFP+ Transceivers for the QFX
Series (continued)
Standards
Specifications
Compliance
Juniper Networks Product SKU number
proprietary 4X10G-LR
Supported models
Signaling rate, each lane
(range)
Connector type
Fiber pairs
Transmit and receive lane
wavelength
Average transmit launch
power, each lane (minimum)
Average transmit launch
power, each lane (maximum)
Average receive power, each
lane (minimum)
Average receive power, each
lane (maximum)
Receiver sensitivity (OMA),
each lane (maximum)
Stressed receiver sensitivity
(OMA), each lane
(maximum)
DOM support
Core/cladding size
Operating distance
Copyright © 2016, Juniper Networks, Inc.
JNP-QSFP-4X10GE-LR
QFX5100-24Q
QFX5100-48S
QFX5100-48T
QFX5100-96S
9.95328 +/- 20 ppm
10.3125 GBd +/-100 ppm
12-ribbon single mode fiber-cable with female MPO/APC connector
NOTE: See "Cable Specifications for QSFP+ and QSFP28 Transceivers"
on page 147.
4
1260 nm to 1355 nm
-6.5 dBm
0.5 dBm
-14.4 dBm
-1.5 dBm
-12.6 dBm
-10.3 dBm
Available
9/125 µm
2 m (6.56 ft) to 10 km (6.21 miles)
Chapter 8: Port and Interface Specifications
121