Power And Electrical Safety Information; General Electrical Safety Guidelines And Warnings - Juniper QFX5100 Hardware Manual

Related
Documentation

Power and Electrical Safety Information

General Electrical Safety Guidelines and Warnings

Copyright © 2016, Juniper Networks, Inc.
¡Atención! El desecho final de este producto debe realizarse según todas las
leyes y regulaciones nacionales
Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets
alla lagar och föreskrifter.
General Safety Guidelines and Warnings on page 239
General Electrical Safety Guidelines and Warnings on page 261
AC Power Electrical Safety Guidelines on page 264
DC Power Electrical Safety Guidelines for Switches on page 266
Laser and LED Safety Guidelines and Warnings
Installation Instructions Warning on page 248
Grounded Equipment Warning on page 255
General Electrical Safety Guidelines and Warnings on page 261
Prevention of Electrostatic Discharge Damage on page 263
AC Power Electrical Safety Guidelines on page 264
AC Power Disconnection Warning on page 265
DC Power Electrical Safety Guidelines for Switches on page 266
DC Power Disconnection Warning on page 268
DC Power Grounding Requirements and Warning on page 269
DC Power Wiring Sequence Warning on page 270
DC Power Wiring Terminations Warning on page 272
Multiple Power Supplies Disconnection Warning on page 273
TN Power Warning on page 273
Action to Take After an Electrical Accident on page 274
WARNING: Certain ports on the device are designed for use as intrabuilding
(within-the-building) interfaces only (Type 2 or Type 4 ports as described in
GR-1089-CORE) and require isolation from the exposed outside plant (OSP)
cabling. To comply with NEBS requirements and protect against lightning
surges and commercial power disturbances, the intrabuilding ports must not
be metallically connected to interfaces that connect to the OSP or its wiring.
The intrabuilding ports on the device are suitable for connection to
intrabuilding or unexposed wiring or cabling only. The addition of primary
Chapter 24: Safety and Compliance Information
261