Switch Fabric (Sf) Module In An Ex8208 Switch; Figure 9: Leds On The Management Port On An Ex8200 Switch; Table 12: Link/Activity Led On The Management Port On Ex8200 Switches; Table 13: Status Led On The Management Port On Ex8200 Switches - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches

Table 12: Link/Activity LED on the Management Port on EX8200 Switches

LED
Link/Activity

Table 13: Status LED on the Management Port on EX8200 Switches

LED
Status
Related
Documentation

Switch Fabric (SF) Module in an EX8208 Switch

30

Figure 9: LEDs on the Management Port on an EX8200 Switch

Table 12 on page 30 describes the Link/Activity LED.
Color
Green
Table 13 on page 30 describes the Status LED (administrative status).
Color
Green
See Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 26
for port location.
See Routing Engine (RE) Module in an EX8216 Switch for port location.
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 183
The Switch Fabric (SF) module provides switching functionality. See Figure 10 on page 31.
An EX8208 switch can have either zero SF modules or one SF module. The base
configuration of an EX8208 switch includes one SF module. See "EX8208 Switch
Configurations" on page 7.
State and Description
Blinking—The port and the link are active, and there is link
activity.
On steadily—The port and the link are active, but there is no
link activity.
Off—The port is not active.
State and Description
On steadily—Administrative status is enabled.
Off—Administrative status is disabled.
Copyright © 2010, Juniper Networks, Inc.