Juniper QFX5100 Hardware Manual page 35

Table 5: Supported QFX and EX Series Switches Configurations (continued)
Platform Element Standalone
Initial software 13.2X51-D25
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
QFX3600
Initial software 12.2X50-D20
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
QFX5100-24Q
Initial software 13.2X51-D10
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
QFX5100-24Q-AA
Copyright © 2016, Juniper Networks, Inc.
QFX3000-G QFX3000–M
12.2X50-D20 12.2X50-D10
clos clos
128 16
NA NA
14.1X53-D15 14.1X53-D15
clos clos
128 16
NOTE:
Supported
both as an
interconnect
device and a
node device.
QFX Virtual Virtual Chassis
Chassis Fabric
13.2X51-D25
ring
10
13.2X50-D15 13.2X51-D20
ring spine and leaf
10 18 out of 20
leaf mode only
Min: 2 out of 20
Max: 4 out of 20
13.2X51-D20 13.2X51-D20
ring spine and leaf
10 20 spine or leaf
NOTE: Use as a
spine with
EX4300,
QFX5100-24Q,
QFX5100-48T,
QFX5100-48S, or
QFX3600.
Min: 2 out of 20
Max: 4 out of 20
Chapter 1: System Overview
Junos Fusion
14.1X53-D16
spine and leaf
64 leaf mode only
15