Figure 74: Installing A Power Supply In A 1 U Qfx5100 Device; Figure 75: Installing A Power Supply In A Qfx5100-96S Device - Juniper QFX5100 Hardware Manual

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Using both hands, place the power supply in the power supply slot on the FRU panel
3.
of the switch and slide it in until it is fully seated and the locking lever slides into place.

Figure 74: Installing a Power Supply in a 1 U QFX5100 Device

Figure 75: Installing a Power Supply in a QFX5100-96S Device

NOTE: Each power supply must be connected to a dedicated power source
outlet.
NOTE: If you have a Juniper Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
AC Power Supply for a QFX5100 Device on page 47
Field-Replaceable Units in a QFX5100 Device on page 12
Port Panel of a QFX5100-48S Device on page 28
Management Panel of a QFX5100 Device on page 19
AC Power Cord Specifications for a QFX Series Device on page 80
Connecting AC Power to a QFX5100 Device on page 171
Connecting DC Power to a QFX5100 Device on page 174
Removing a Power Supply from a QFX5100 Device on page 204
Chapter 17: Replacing Power Supply
. Failure
203