Management And Console Port Leds On The Front Panel; Uplink Ports On Acx2200 Routers; Table 7: Sfp And Sfp+ Link Leds; Table 8: Management And Console Leds - Juniper ACX2200 Hardware Manual

ACX2200 Universal Access Router Hardware Guide

Management and Console Port LEDs on the Front Panel

Related
Documentation

Uplink Ports on ACX2200 Routers

16

Table 7: SFP and SFP+ Link LEDs

Name Location
Link Left
RX Right
Two RJ-45 ports, labeled MGMT
the status of the port. Table 8 on page 16

Table 8: Management and Console LEDs

Name Location
Link/Activity Left
RX Right
Troubleshooting Resources for ACX2200 Routers on page 105
Front Panel of an ACX2200 Router on page 13
Uplink Ports on ACX2200 Routers on page 16
TIP: You can find information about the pluggable transceivers supported
on your Juniper Networks device by using the Hardware Compatibility Tool.
In addition to transceiver and connector type, the optical and cable
characteristics—where applicable—are documented for each transceiver.
The Hardware Compatibility Tool allows you to search by product, displaying
all the transceivers supported on that device, or category, displaying all the
transceivers by interface speed or type. The Hardware Compatibility Tool is
located at
https://pathfinder.juniper.net/hct/
Color State
Green On
– Off
Green Blinking
– Off
and CONSOLE/AUX , each have a pair of LEDs that display
describes the LEDs in more detail.
Color State
Green On
Yellow Blinking
– Off
Green Blinking
– Off
Description
Link is online.
No link.
The port is receiving data.
The port is not receiving data.
Description
Link is online.
Indicates link activity.
No link.
The port is receiving data.
The port is not receiving data.
.
Copyright © 2017, Juniper Networks, Inc.