QFX5100 Switch Hardware Guide
Table 33: Supported Optical Transceivers for the QFX5100 Switch
Part Number
QFX-SFP-1GE-T
QFX-SFP-1GE-SX
QFX-SFP-1GE-LX
JNP-SFP-10G-BX10D
88
Figure 44: Port Panel QFX5100-24Q-AA Device
1—
Electrostatic discharge (ESD) terminal
2—QSFP+ access or uplink ports (24)
Figure 45: Port Panel QFX5100-24Q-AA Device
1—
Electrostatic discharge (ESD) terminal
2—QSFP+ access or uplink ports (24)
Table 33 on page 88
lists the optical transceivers supported on QFX5100 devices. For
the full specification for each these optical transceivers, see the
or
"Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX
Tool
Series" on page
94.
Description
SFP module 1000BASE-T Gigabit Ethernet .
Also available in packs of eight transceivers,
(JNP-1G-T–8PACK)
SFP module 1000BASE-SX Gigabit Ethernet
Also available in packs of eight transceivers,
(JNP-1G-SX-8PACK)
SFP module 1000BASE-LX Gigabit Ethernet
SFP module 10-Gigabit Ethernet bi-directional;
works in conjunction with JNP-SFP-10G-BX10U
3—
Expansion module bay (shows a
QFX-PFA-4Q installed)
3—
Expansion module bay (shows a
QFX-PFA-4Q installed)
Hardware Compatibility
Maximum Distance Supported
100 m transmission on Category 5 cable
220 m transmission on FDDI, multimode fiber
(MMF) cable
275 m transmission on OM1, MMF cable
550 m transmission on OM2, MMF cable
10 km transmission on single-mode fiber (SMF)
cable
550 m transmission on OM1, MMF cable
550 m transmission on OM2, MMF cable
10 km transmission on single strand fiber cable
Copyright © 2016, Juniper Networks, Inc.