Management Port Leds On An Acx5000 Router; Table 8: Chassis Status Leds On An Acx5000 Router - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router

Table 8: Chassis Status LEDs on an ACX5000 Router

Name
ALM–Alarm or beacon
SYS–System
MST–Master
ID–Identification
Related
Documentation

Management Port LEDs on an ACX5000 Router

24
Color
Unlit
Red
Amber
Unlit
Green
Unlit
Green
Unlit
Blue
Management Panel of an ACX5000 Router on page 17
show chassis alarms
request chassis beacon
The management ports (labeled
Base-T and SFP 1000 Base-X connections) on an ACX5000 router have two LEDs that
State Description
Off The router is halted or there is no alarm.
On steadily A major hardware fault has occurred, such
as a temperature alarm or power failure,
and the router has halted. Power off the
ACX5000 router by setting the AC power
source outlet to the OFF (
unplugging the AC power cords. Correct
any voltage or site temperature issues,
and allow the router to cool down. Power
on the ACX5000 router and monitor the
power supply and fan LEDs to help
determine where the error is occurring.
On steadily A minor alarm has occurred, such as a
software error. Power off the ACX5000
router by setting the AC power source
outlet to the OFF (
unplugging the AC power cords. Power on
the ACX5000 router and monitor the
status LEDs to ensure that Junos OS boots
properly.
Off The router is powered off or halted.
On steadily Junos OS for ACX Series is loaded on the
router.
Off The router is a linecard member.
On steadily The router is a standalone router.
Off The beacon feature is not enabled on the
router. This feature is enabled using the
request chassis beacon
Blinking The beacon feature is enabled on the
router. This feature is enabled using the
request chassis beacon
for 10/100/1000 Base-T and
C0
) position, or
O
) position, or
O
command.
command.
for 10/100/1000
C1
Copyright © 2015, Juniper Networks, Inc.