Field-Replaceable Units In A Qfx5100 Device - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 3: QFX5100 Switch Product Numbers (continued)
P roduct Numbers
QFX5100-48T-DC-AFO
QFX5100-96S-AFI
QFX5100-96S-AFO
QFX5100-96S-DC-AFI
QFX5100-96S-DC-AFO
Related
Documentation

Field-Replaceable Units in a QFX5100 Device

12
Ports
48 10GBASE-T and 6
QSFP+ transceivers
96 SFP+ and 8 QSFP+
transceivers
96 SFP+ and 8 QSFP+
transceivers
96 SFP+ and 8 QSFP+
transceivers
96 SFP+ and 8 QSFP+
transceivers
CAUTION: Mixing different types (AC and DC) of power supplies in the same
chassis is not supported. Mixing different airflow modules in the same chassis
is not supported.
Management Panel of a QFX5100 Device on page 19
Port Panel of a QFX5100-48S Device on page 28
Port Panel of a QFX5100-24Q Device on page 23
Port Panel of a QFX5100-96S Device on page 32
QFX5100 Device Hardware Overview on page 3
Field-replaceable units (FRUs) are components that you can replace at your site. The
QFX5100 device FRUs are hot-insertable and hot-removable: you can remove and replace
one of them without powering off the switch or disrupting the switching function.
CAUTION: Replace a failed power supply with a blank panel or new power
supply within one minute of removal to prevent chassis overheating. The
switch continues to operate with only one power supply running. Replace a
failed fan module with a new fan module within one minute of removal to
prevent chassis overheating. Do not operate the switch with missing FRUs
for longer than one minute.
Number of
Expansion Power
Modules Supply
DC
AC
AC
DC
DC
Copyright © 2016, Juniper Networks, Inc.
Number
of Mgt.
Ports Airflow
3 Air Out (ports to
FRUs)
2 Air In
(FRUs-to-ports)
2 Air Out
(ports-to-FRUs)
2 Air In
(FRUs-to-ports)
2 Air Out
(ports-to-FRUs)