Viewing System Information; Chassis Status Leds On A Qfx5100 Device; Figure 34: Chassis Status Leds On A Qfx5100 Switch - Juniper QFX5100 Hardware Manual

CHAPTER 5

Viewing System Information

Chassis Status LEDs on a QFX5100 Device

Copyright © 2016, Juniper Networks, Inc.
Chassis Status LEDs on a QFX5100 Device on page 53
Management Port LEDs on a QFX5100 Device on page 55
Access Port and Uplink Port LEDs on a QFX5100 Device on page 57
Fan Module LED on a QFX5100 Device on page 60
AC Power Supply LEDs on a QFX5100 Device on page 61
DC Power Supply LEDs on a QFX5100 Device on page 62
The QFX5100 switch series has four status LEDs on the FRU side of the chassis, next to
the management ports (see

Figure 34: Chassis Status LEDs on a QFX5100 Switch

1— Status LEDs
2— em1–SFP management Ethernet port (C1)
Cage (socket for either 10/100/1000 Base-T
RJ45 SFP or 1GbE fiber SFP)
3— Reset button, see caution statement below
CAUTION: Do not use the
under the direction of Juniper Networks Technical Assistance Center (JTAC).
Figure 34 on page 53).
4— em0–RJ-45 (10/100/1000 Base-T)
management Ethernet port (C0)
5— RJ-45 console port (CON )
6— USB port
Reset button to restart the power sequence unless
53