Port Panel Of A Qfx5100-96S Device; Switch Ports; Figure 18: Qfx5100-96S Switch Port Panel - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide

Port Panel of a QFX5100-96S Device

Switch Ports

32
The port panel of the QFX5100-96S switch consists of 96 small form-factor pluggable
plus (SFP+) and 8 quad small-form factor pluggable plus (QSFP+) ports. Physical
ports( through ) support 10 Gbps SFP+ transceivers and normally are configured as
0 95
access ports. The eight 40-Gigabit ports (
and are normally configured as uplinks or Virtual Chassis ports (VCPs). Although the 104
physical ports of the QFX5100-96S would map to 128 logical ports using channelization,
only 104 logical ports are supported.
Figure 18 on page 32 shows the port panel of a QFX5100-96S switch.

Figure 18: QFX5100-96S Switch Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
This topic describes:
Switch Ports on page 32
Channelizing Interfaces on page 33
Virtual Chassis and Virtual Chassis Fabric Support on page 33
The QFX5100-96S switch ports, (
1 Gbps SFP+ transceivers
10 Gbps SFP+ transceivers
10 Gbps direct attach copper (DAC) cables
Ports 96 through 104 support:
40 Gbps QSFP+ transceivers
Additionally ports and
96
QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ direct attach copper break out (DACBO) cables
through
96
3— 40 Gigabit Ethernet ports (8)
0 through 95 ) support:
support:
100
) support QSFP+ transceivers
104
Copyright © 2016, Juniper Networks, Inc.