Interface Support For The Qfx5100 Device - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide

Interface Support for the QFX5100 Device

86
Management Port LEDs on a QFX5100 Device on page 55
QFX10002 Management Port LEDs
QFX10000 Control Board LEDs
QFX5200 Management Port LEDs
QFX5110 Management Port LEDs
All product SKUs of the QFX5100 supply quad small form-factor pluggable plus (QSFP+)
ports for use as uplinks, as access ports, or as Virtual Chassis ports (VCPs). These 40
GbE ports support QSFP+ transceivers, QSFP+ direct-attach copper (DAC) cables, and
DAC breakout cables (DACBO). The QFX5100-48S has 6 QSFP+ ports; the QFX5100-96S
has 8 QSFP+ ports; the QFX5100-24Q has 24 built-in QSFP+ ports that can all be used
as uplinks. The You can also add two QFX-EM-4Q expansion modules to the
QFX5100-24Q for additional QSFP+ uplink ports. Each QSFP+ port on a QFX5100-24Q
can be configured to operate as 10-Gigabit Ethernet interface by using a breakout cable
or as a single 40-Gigabit Ethernet interface. See Configuring the QSFP+ Port Type on
QFX5100 Devices for more information.
On all QFX5100 product SKUs, the ports are enabled by default and the default config
adds the ports to the default VLAN.
Downlink ports are product SKU-specific:
QFX5100-96S–has 96 small form-factor pluggable plus (SFP+) ports that support
SFP and SFP+ transceivers, as well as DAC cables.
QFX5100-48S–has 48 SFP+ ports that support SFP and SFP+ transceivers, as well as
DAC cables.
QFX5100-48T–has 6 QSFP+ uplink ports.
QFX5100-24Q–has 24 QSFP+ access ports that can be configured to operate as
10-Gigabit Ethernet interfaces or as a single 40-Gigabit Ethernet interface.
QFX5100-24Q-AA–has 24 QSFP+ access ports that can be configured to operate as
10-Gigabit Ethernet interfaces or as a single 40-Gigabit Ethernet interface.
Figure 40 on page 87 shows the location of SFP+ and QSFP+ ports for the QFX5100-96S,
Figure 41 on page 87 shows these ports for the QFX5100-48S device,
shows the RJ45 and QSFP+ ports for the QFX5100-48T device, and
shows the location of QSFP+ ports for the QFX5100-24Q device.
Figure 42 on page 87
Figure 43 on page 87
Copyright © 2016, Juniper Networks, Inc.