Dodge RAM TRUCK 1500 1995 Service Manual page 446

B R
AUDIO SYSTEMS 8F - 7
(8) Pull radio out of instrument panel and discon­
nect wiring and antenna cable (Fig. 7).
ANTENNA
J948F-6
Fig. 7 Radio Connectors
(9) Remove screw from ground strap (Fig. 7) and
remove radio.
(10) Reverse removal procedures to install.
SPEAKERS REMOVE/INSTALL
FRONT DOOM
(1) Remove 2 screws and door pull cup (Fig. 8).
REMOVE 2 SCREWS
J948S-2
Fig. 8 Door Pull Cup
(2) Remove power window/lock switch by reaching
through door pull cup opening and depressing rear
switch retaining tab (Fig. 9).
SWITCH BEZEL
RETAINING TAB
J948S-3
(3) Pull rear of switch up and away from door.
(4) Unplug connectors from switch (Fig. 10).
CONNECTOR
LOCKING
TABS
SWITCH PANEL
FRONT CLIP
J948S-8
Fig. 10 Door Switch Connectors
(5) Pull power mirror switch control knob rearward
to remove from switch (Fig. 11).
DOOR TRIM
PANEL
SWITCH CONTROL
KNOB
POWER MIRROR
- SWITCH — 7
J948T-6
Fig. 11 Power Mirror Knob Remove/Install
(6) Remove switch retaining nut from switch (Fig.
12).
To aid in removal of the trim panel, start at
the bottom of the panel.
(7) Using a wide flat-bladed tool such as a trim
stick, pry trim panel away from door around perime­
ter and remove trim panel.
Fig. 9 Switch Bezel Rear Retaining Tab