Dodge RAM TRUCK 1500 1995 Service Manual page 512

B R
POWER SE1TS 8R - 3
POWER SEAT CIRCUIT
CIRCUIT BREAKER #2
(30 A M P )
BATTERY
J948R-1
S E R V I C E P R O C E D U R E S
POWER SEAT SWITCH REMOVE/INSTALL
(1) Disconnect battery negative cable.
(2) Remove 2 screws holding switch and bezel to
seat (Fig. 1).
RELEASE TABS (3)
J948R-2
Fig. 1 Seat Switch and Bezel Remove
(3) Remove 2 screws holding switch to bezel (Fig.
2).
J948R-3
Fig. 2 Seat Switch Remove
(4) Pull switch from seat far enough to access con­
nector, and unplug.
(5) Reverse removal procedures to install.
POWER SEAT ADJUSTER/MOTORS REiOWE/
INSTALL
(1) Disconnect battery negative cable.
(2) Remove 3 bolts attaching seat frame to floor
pan.
(3) Remove 1 nut from stud locating seat frame to
floor pan.