B R
Fig. 5 Power Mirror Knob
Remove/install
Fig. 6 Power Mirror Switch Nut
(5) Roll door watershield away from bottom of door
to allow access to lock motor (Fig. 7).
POWER LOCKS
SP - 3
Fig. 7 Lock Motor and Latch
Remove/install
(6) Remove 3 screws holding lock motor and latch
assembly to door.
(7) Disconnect linkage rods.
(8) Pull motor and latch out far enough to unplug
electrical connector and remove motor and latch from
door.
(9) Reverse removal procedures to install. Tighten
screws to 10.5 N-m (95 in. lbs.).