Replacing Staple Cartridge (For Finisher-A1) - Fuji Xerox ApeosPort-IV C5575 Administration Manual

13
Return the cover to the original position.
Note
14
Rotate the release lever clockwise to lock the
cover.
15
Close the front cover.
Note

Replacing Staple Cartridge (for Finisher-A1)

When the optional Finisher-A1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When this message appears, load a new staple case
into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance.
Note
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Take the staple cartridge out of the finisher.
• Push the cover until it clicks into place.
• If the front cover is not closed completely, a message appears and the machine will remain paused.
Use only staple cartridges recommended by Fuji Xerox.
• To order a staple cartridge, contact our Customer Support Center.
Replacing Consumables
75
3