Flywheel Installation - Toro TX525 Service Manual

ENGINE
16. Using 14mm socket, remove the 5 bolts securing the
flywheel to the crankshaft (Fig. 0237).
17. Remove the flywheel (Fig. 0238).
4-44
Fig 0237 PICT-4843
Fig 0238 PICT-4844
18. Inspect the starter engagement teeth. Replace the
flywheel if worn or damaged (Fig. 0239).

Flywheel Installation

1. Slide the flywheel onto the crankshaft (Fig. 0240).
Rev. 000
Fig 0239 PICT-4847
Fig 0240 PICT-4844
TX525 Service Manual