Electrical
Many of the electrical components are located inside the
control panel. To access them, remove the heat shield.
Heat Shield Removal
1. Raise the hood.
2. Remove the hairpin cotter from the hood rod (Fig.
0796).
TX525 Service Manual
Fig 0796
PICT-5256
3. Remove the hood rod (Fig. 0797).
4. Using a 3/16" Allen wrench, remove the top 2 screws
securing the heat shield to the tower. Using a 1/2"
socket, remove the bottom 2 screws securing the
heat shield to the tower (Fig. 0798).
Rev. 000
ELECTRICAL
Fig 0797
Fig 0798
PICT-5257a
PICT-5258
5-1