Gpm Pump Disassembly - Toro TX525 Service Manual

HYDRAULIC SYSTEM

6 gpm Pump Disassembly

1. Mark the bushing assembly with a single line that
extends out onto the pump housing (Fig. 0994).
2. Using a needle nose pliers, grab the center of the
small bushing and lift the bushing from the pump
housing assembly (Fig. 0995).
6-44
Fig 0994 PICT-2829
Fig 0995 PICT-2830a
3. Remove the driven gear from the pump assembly
(Fig. 0996).
4. Remove the drive gear from the pump assembly
(Fig. 0997).
Rev. 000
Fig 0996 PICT-2832a
Fig 0997 PICT-2833a
TX525 Service Manual