Narrow Track Removal - Toro TX525 Service Manual

DRIVE SYSTEM
9. Turn the tensioning screw counter-clockwise until
the distance between the tension nut and the back of
the tension arm is 2-3/4" (7cm) (Fig. 1531).
A
A. 2-3/4" (7cm)
10. Align the closest notch in the tension screw to the
locking bolt hole and secure the screw with the
locking bolt, spacer and nut (Fig. 1532).
11. Lower the traction unit to the ground.
7-72
Fig 1531 fig. 33 m-4775
Fig 1532 PICT-4440

Narrow Track Removal

1. Lift the machine. Refer to "Lifting the Machine for
Service" on page 7-1.
2. Raise the loader arms approximately 12" (30.48cm).
3. Stop the engine and remove the key.
4. Using a 7/16" socket and wrench, remove the lock-
ing bolt and nut (Fig. 1533).
5. Using a 1/2 inch drive ratchet, release the drive
tension by turning the tensioning screw clockwise
(Fig. 1534).
Rev. 000
Fig 1533
PICT-5340
Fig 1534 PICT-5341
TX525 Service Manual