DRIVE SYSTEM
Idler Arm Replacement
Idler Arm Removal
1. Shut engine off, apply parking brake, and remove
ignition key.
2. Lift the engine hood assembly.
3. Remove the hairpin cotter from the prop rod (Fig.
1302).
4. Remove the prop rod (Fig. 1303).
7-12
Fig 1302
Fig 1303
5. Using a 3/16" Allen wrench, remove the top 2
screws. Using a 1/2" socket, remove the bottom 2
screws securing the heat shield to the tower (Fig.
1304).
6. Remove the heat shield (Fig. 1305).
Belt 001
Belt 003
Rev. 000
Fig 1304
PICT-5258
Fig 1305
TX525 Service Manual
Belt 005