Safety Information; General Information; Think Safety First - Toro TX525 Service Manual

SAFETY INFORMATION

General Information

General Information
This symbol means WARNING or
This symbol means WARNING or
PERSONAL SAFETY INSTRUCTION -
PERSONAL SAFETY INSTRUCTION
read the instruction because it has to do
- read the instruction because it has to
with your safety. Failure to comply with
do with your safety. Failure to comply
the instruction may result in personal
with the instruction may result in
injury or even death.
personal injury or even death.
This manual is intended as a service
This manual is intended as a service and repair
and repair manual only. The safety instructions provided
manual only. The safety instructions provided herein
herein are for troubleshooting, service, and repair of the
are for troubleshooting, service, and repair of the
Sitework Systems TX525 compact utility loader.
Sitework Systems TX 413 compact utility loader.
The TX525 loader and attachment operator's manual
contain safety information and operating tips for safe

Think Safety First

operating practices. Operator's manuals are available on
line at www.toro.com or:
Avoid unexpected starting of engine...
The Toro Company
Always turn off the engine and disconnect the spark
Publications Department
plug wire(s) before cleaning, adjusting, or repair.
8111 Lyndale Avenue South
Bloomington, MN 55420
Avoid lacerations and amputations...
Stay clear of all moving parts whenever the engine is
running. Treat all normally moving parts as if they were
Think Safety First
moving whenever the engine is running or has the
potential to start.
Avoid unexpected starting of engine...
Avoid burns...
Always turn off the engine and disconnect the spark plug
Do not touch the engine, muffler, or other components
wire(s) before cleaning, adjusting, or repair.
which may increase in temperature during operation,
while the unit is running or shortly after it has been
Avoid lacerations and amputations...
running.
Stay clear of all moving parts whenever the engine is
Avoid fires and explosions...
running. Treat all normally moving parts as if they were
moving whenever the engine is running or has the
Avoid spilling fuel and never smoke while working with
potential to start.
any type of fuel or lubricant. Wipe up any spilled fuel or
oil immediately. Never remove the fuel cap or add fuel
Avoid burns...
when the engine is running. Always use approved,
labeled containers for storing or transporting fuel and
Do not touch the engine, muffler, or other components
lubricants.
which may increase in temperature during operation,
while the unit is running or shortly after it has been
Avoid asphyxiation...
running.
Never operate an engine in a confined area without
proper ventilation.
TX525 Service Manual
1
SAFETY INFORMATION
Avoid fires and explosions...
Avoid spilling fuel and never smoke while working with
The TX 413 loader and attachment operator's
any type of fuel or lubricant. Wipe up any spilled fuel
manuals contain safety information and operating tips
or oil immediately. Never remove the fuel cap or add
for safe operating practices. Operator's manuals are
fuel when the engine is running. Always use approved,
available through your Toro parts source or:
labeled containers for storing or transporting fuel and
lubricants.
The Toro Company
Publications Department
Avoid asphyxiation...
8111 Lyndale Avenue South
Bloomington, MN
Never operate an engine in a confined area without
proper ventilation.
Avoid injury from batteries...
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Battery gases can
explode. Keep cigarettes, sparks, and flames away from
Avoid injury from batteries...
the battery.
Battery acid is poisonous and can cause burns. Avoid
Avoid injury due to inferior parts...
contact with skin, eyes, and clothing. Battery gases
can explode. Keep cigarettes, sparks, and flames away
Use only original equipment parts to ensure that
from the battery.
important safety criteria are met.
Avoid injury due to inferior parts...
Avoid injury to bystanders...
Use only original equipment parts to ensure that
important safety criteria are met.
Always clear the area of bystanders before starting or
testing powered equipment.
Avoid injury to bystanders...
Avoid injury due to projectiles...
Always clear the area of bystanders before starting or
testing powered equipment.
Always clear the area of sticks, rocks, or any other
debris that could be picked up and thrown by the
Avoid injury due to projectiles...
powered equipment.
Always clear the area of sticks, rocks, or any other
Avoid modifications...
debris that could be picked up and thrown by the
powered equipment.
Never alter or modify any part unless it is a factory
approved procedure.
Avoid modifications...
Never alter or modify any part unless it is a factory
Avoid unsafe operation...
approved procedure.
Always test the safety interlock system after making
Avoid unsafe operation...
adjustments or repairs on the machine. Refer to the
Electrical section in this manual for more information.
Always test the safety interlock system after making
adjustments or repairs on the machine. Refer to the
Electrical section in this manual for more information.
Rev. 000
55420
1-1