Loader Valve Rebuild - Toro TX525 Service Manual

HYDRAULIC SYSTEM

Loader Valve Rebuild

1. Before disassembly of any hydraulic component, use
a clean, dirt-free work surface and clean solvent to
prevent system contamination (Fig. 1104).
C
D
A. Rubber Bellows
B. System relief
C. Work port relief (2)
6-72
A
B
E
Fig 1104 PICT-2583
D. Spring Cap
E. Detent spring cap
1. Remove the cable tie from around the rubber
bellows (Fig. 1105).
2. Remove the rubber bellows from the valve assembly
(Fig. 1106). Wipe the excess grease from the joy-
stick.
Rev. 000
Fig 1105
PICT-2588a
Fig 1106 PICT-2589a
TX525 Service Manual