MAINTENANCE
Changing Engine Coolant Assembly
1. Clean any debris around and under the radiator.
2. Using a 17mm wrench install the engine block
coolant drain plug (Fig. 0033).
3. Remove the drain hose and close the petcock.
4. Position the radiator/oil cooler assembly into the
frame so it is on top of the foam seals and behind
the 3 radiator mount holes (Fig. 0034).
3-14
Fig 0033
PICT-8910
Fig 0034
PICT-5122
5. Using 1-1/16" and 1-1/8" wrenches, install the hy-
draulic outlet line to the oil cooler outlet fitting (Fig.
0035).
6. Position the radiator mount into the frame (Fig.
0036).
Rev. 000
Fig 0035
PICT-5126
Fig 0036
PICT-5129
TX525 Service Manual