Starter Solenoid Replacement; Starter Solenoid Removal - Toro TX525 Service Manual

10. Using a 1/2" wrench, connect the negative battery
cable to the battery (Fig. 0279).
11. Install the rear access panel (Fig. 0280).
12. Remove the loader arm lock and lower the loader
arms.
13. Lower the hood.
TX525 Service Manual
Fig 0279 PICT-5158
Fig 0280 PICT-4505a

Starter Solenoid Replacement

Starter Solenoid Removal

1. Park the machine on a flat surface.
2. Raise the hood.
3. Raise the loader arm. Lock the loader arm into
position using the loader arm lock.
4. Turn the machine off and remove the key. Allow the
machine to cool.
5. Remove the rear access panel (Fig. 0281).
Rev. 000
ENGINE
Fig 0281 PICT-4505a
4-55