Brake Cable Replacement 270000100 - 270000999 - Toro TX525 Service Manual

27. Route the brake cable out of the frame and remove
the brake assembly from the machine (Fig. 1658).
Brake Cable Replacement 270000100 -
270000999
1. Remove the brake assembly from the frame.
Refer to "Brake Assembly Removal 270000100 -
270000999" on page 8-1.
2. Remove the convoluted tube from the brake cable
(Fig. 1659).
TX525 Service Manual
Fig 1658 PICT-4328
Fig 1659 PICT-4299a
3. Slide the spring back to expose the tube guide and
set screw. Hold the spring back by placing the spring
in the slot on the tube guide (Fig. 1660).
4. Using a 3/32" hex wrench, loosen the set screw that
secures the tube guide to the brake cable assembly
(Fig. 1661).
Rev. 000
BRAKES
Fig 1660 PICT-1697a
Fig 1661 PICT-1699a
8-7