Starter Replacement; Starter Removal - Toro TX525 Service Manual

18. Install the hairpin cotter (Fig. 0257).
19. Install the tandem pump and coupler assembly.
Refer to "Hydraulic Tandem Pump Installation" on
page 6-37.
TX525 Service Manual
Fig 0257

Starter Replacement

Starter Removal

1. Park the machine on a flat surface.
2. Raise the hood.
3. Raise the loader arm. Lock the loader arm into
position using the loader arm lock.
4. Turn the machine off and remove the key. Allow the
machine to cool.
5. Remove the rear access panel (Fig. 0258).
Belt 001
Rev. 000
ENGINE
Fig 0258 PICT-4505a
4-49