14 Gpm Pump Assembly - Toro TX525 Service Manual

HYDRAULIC SYSTEM
10. Install the snap ring into the pump cover (Fig. 1010).

14 gpm Pump Assembly

Note: Lubricate all surfaces on reassembly.
1. Remove the bushing from the drive gear and driven
gear shafts (Fig. 1011).
6-48
Fig 1010 PICT-2848a
Fig 1011 PICT-2849a
2. Remove the driven gear from the bushing (Fig.
1012).
3. Remove the drive gear from the bushing (Fig. 1013).
Rev. 000
Fig 1012 PICT-2850a
Fig 1013 PICT-2851a
TX525 Service Manual