HYDRAULIC SYSTEM
Hydraulic Tandem Pump
Replacement
Hydraulic Tandem Pump Removal
1. Raise the machine and set it on jack stands. Refer to
"Lifting the Machine for Service" on page 7-1.
2. Remove the rear access panel (Fig. 0942).
6-30
Fig 0942
PICT-4505
3. Using a 3/8" socket, remove the 6 screws that
secure the left and right rear cover support panels to
the tower assembly (3 screws per panel). Remove
the panels (Fig. 0943).
4. Using 3/4" and 1/2" sockets, remove the 7 bolts and
nuts securing the rear frame cover to the frame and
fuel tank bracket. Remove the rear frame cover (Fig.
0944).
Note: The rear of the machine may have to be lifted
to reposition the jack stands so that the rear
frame cover can be removed.
Rev. 000
Fig 0943
PICT-4256
Fig 0944
PICT-4259
TX525 Service Manual