DRIVE SYSTEM
7. Using the floor jack, lower the track guide from the
frame (Fig. 1545).
Track Guide Installation
1. Place a suitable board onto a hydraulic floor jack.
Place the track guide on top of the floor jack.
2. Position the track guide to the frame (Fig. 1546).
7-76
Fig 1545
PICT-4523
Fig 1546
PICT-4523
Note: The track guide end with the step, is mounted
toward the drive sprocket (Fig. 1547).
3. Using a 3/4" socket, loosely install 4 bolts and lock
washers to secure the track guide to the mainframe
(Fig. 1548).
Rev. 000
Fig 1547
PICT-4545
Fig 1548
PICT-4522
TX525 Service Manual