Oil Cooler Installation - Toro TX525 Service Manual

5. Using a 1/2" wrench, loosen the other 2 bolts, wash-
ers and lock washers securing the oil cooler to the
bottom side of the radiator (Fig. 0101).
6. Remove the oil cooler from the radiator by sliding
the oil cooler flange out from underneath the 2 bolts
(Fig. 0102).
TX525 Service Manual
Fig 0101 PICT-5064
Fig 0102 PICT-5065
7. Inspect the oil cooler. Repair or replace.
8. Inspect the foam strips on the radiator. If worn or
damaged, replace.

Oil Cooler Installation

1. Clean all dirt and debris from the radiator assembly.
2. Position the oil cooler onto the radiator by sliding the
oil cooler mounting flange under the 2 flat washers
on the bottom side of the radiator (Fig. 0103).
Rev. 000
ENGINE
Fig 0103
PICT-5066
4-7