Work Port Relief - Toro TX525 Service Manual

HYDRAULIC SYSTEM
7. Using a 24mm socket and wrench, tighten the body
of the main relief valve onto the main relief valve
bonnet (Fig. 1183).

Work Port Relief

The work relief ports relieve the fluid spikes when the Lift
and Tilt Cylinders are being actuated.
These ports are non-adjustable. Port relief setting is
2030 psi (140 bar) (Fig. 1184).
6-92
Fig 1183 PICT-2658
Fig 1184 PICT-2664
1. Using a 10mm Allen wrench, remove the 2 work port
relief plugs (Fig. 1185 and Fig. 1186).
Rev. 000
Fig 1185 PICT-2663
Fig 1186 PICT-2668a
TX525 Service Manual