Belt Replacement
Belt Removal
1. Position the traction unit on a flat surface.
2. Remove the ignition key.
3. Apply the parking brake.
4. Raise the hood.
5. Remove the hairpin cotter from the hood prop rod
(Fig. 1276).
TX525 Service Manual
Fig 1276
6. Support the hood and remove the prop rod (Fig.
1277).
7. Using a 1/2" wrench, remove the 2 lower heat shield
screws (Fig. 1278).
Belt 001
Rev. 000
DRIVE SYSTEM
Fig 1277
Fig 1278
Belt 003
Belt 002
7-5