Left Hydrostatic Pump Replacement; Left Hydrostatic Pump Removal - Toro TX525 Service Manual

Left Hydrostatic Pump Replacement

Left Hydrostatic Pump Removal

1. Raise the machine and set it on jack stands. Refer to
"Lifting the Machine for Service" on page 7-1.
2. Remove the rear access panel (Fig. 1407).
3. Using a 3/8" socket, remove the 6 screws that
secure the left and right rear cover support panels to
the tower assembly (3 screws per panel). Remove
the panels (Fig. 1408).
TX525 Service Manual
Fig 1407 PICT-4505
Fig 1408 PICT-4504
DRIVE SYSTEM
4. Using 3/4" and 1/2" sockets, remove the 7 bolts and
nuts securing the rear frame cover to the frame.
Remove the rear frame cover (Fig. 1409).
Note: The rear of the machine may have to be lifted
to reposition the jack stands so that the rear
frame cover can be removed.
5. Remove the fuel tank bracket (Fig. 1410).
Rev. 000
Fig 1409 PICT-4259
Fig 1410 PICT-5626
7-39