Brake Assembly Removal 280000100 & Higher - Toro TX525 Service Manual

BRAKES
Brake Assembly Removal 280000100 &
higher
1. Raise the machine and set it on jack stands. Refer to
"Lifting the Machine for Service" on page 7-1.
2. Place the brake handle in the "OFF" position.
3. Remove the rear access panel (Fig. 1700).
4. Using a 3/8" socket, remove the 6 screws that
secure the left and right rear cover support panels to
the tower assembly (3 screws per panel). Remove
the panels (Fig. 1701).
8-18
Fig 1700 PICT-4505
Fig 1701
PICT-4365a
5. Using 3/4" and 1/2" sockets, remove the 7 bolts and
nuts securing the rear frame cover to the frame and
fuel tank bracket. Remove the rear frame cover (Fig.
1702).
Note: The rear of the machine may have to be lifted
to reposition the jack stands so that the rear
frame cover can be removed.
6. Remove the fuel tank bracket (Fig. 1703).
Rev. 000
Fig 1702 PICT-4259
Fig 1703 PICT-5626
TX525 Service Manual