19. Install the piston seal on top of the back-up ring (Fig.
1215).
20. Install the wear ring onto the piston (Fig. 1216).
TX525 Service Manual
Fig 1215
PICT-3062a
Fig 1216
PICT-3063a
HYDRAULIC SYSTEM
Lift Cylinder Assembly
Note: Lubricate all parts during assembly.
1. Secure the cylinder ram into a vise.
2. Protect the threads of the ram and then slide the
o-ring onto the ram shaft and into the groove (Fig.
1217).
3. Remove the thread protection material.
4. Slide the head onto the cylinder ram (Fig. 1218).
Rev. 000
Fig 1217
PICT-3064a
Fig 1218
PICT-3065a
6-101