Alternator Replacement
Alternator Removal
1. Park the machine on a flat surface.
2. Raise the hood.
3. Raise the loader arm. Lock the loader arm into
position using the loader arm lock.
4. Turn the machine off and remove the key. Allow the
machine to cool.
5. Remove the rear access panel (Fig. 0175).
TX525 Service Manual
Fig 0175
PICT-4505a
6. Using a 1/2" wrench, disconnect the negative battery
cable from the battery (Fig. 0176).
7. Remove the left hand side panel (Fig. 0177).
Rev. 000
ENGINE
Fig 0176
PICT-5158
Fig 0177
PICT-4945
4-27