Tensioner Wheel Bearing Replacement - Narrow Track; Tensioner Wheel Bearing Removal - Narrow Track - Toro TX525 Service Manual

14. Slide the tensioner bolt and nut into the tensioner
arm (Fig. 1622).
15. Rotate the tensioner arm so the top is facing up for
proper installation and slide it back into the main-
frame (Fig. 1623).
16. Install the track. Refer to "Wide Track Installation" on
page 7-70.
17. Lower the loader arm.
TX525 Service Manual
Fig 1622 PICT-4587
Fig 1623 PICT-4590
DRIVE SYSTEM
Tensioner Wheel Bearing
Replacement - Narrow Track
Tensioner Wheel Bearing Removal - Narrow
Track
1. Raise the machine. Refer to "Lifting the Machine for
Service" on page 7-1.
2. Raise the loader arm.
3. Remove the track. Refer to "Narrow Track Removal"
on page 7-72.
4. Slide the tensioner arm out to access the bolt head
on the inner side of the tensioner wheel. Using a 1"
socket and wrench, remove the tensioner wheel axle
bolt, washers and nut (Fig. 1624).
Rev. 000
Fig 1624 PICT-5347
7-97