Spool Loader Valve Installation - Toro TX525 Service Manual

15. Remove the handle from the valve and transfer it to
the replacement valve (Fig. 0847).
16. Transfer all fittings and the handle over to the re-
placement 2 spool loader valve.
TX525 Service Manual
Fig 0847 PICT-2584a
HYDRAULIC SYSTEM

2 Spool Loader Valve Installation

1. Remove the protective caps from the hydraulic lines
and fittings.
2. Position the 2 spool loader valve into the control
panel (Fig. 0848).
3. Use a 1/2" socket and wrench, install the 3 mounting
bolts and lockwashers to secure the 2 spool loader
valve to the control panel (Fig. 0849).
Rev. 000
Fig 0848 PICT-4896
Fig 0849 PICT-4888
6-5