Ignition Switch; Purpose; Location; How It Works - Toro TX525 Service Manual

ELECTRICAL
5. Remove the heat shield (Fig. 0799).
5-2
Fig 0799
PICT-5259

Ignition Switch

Purpose

This component provides the proper switching for the
starter, ignition, accessories, and safety circuits.

Location

The ignition switch is mounted on the left side of the
control panel (Fig. 0800).

How It Works

Detents inside the ignition switch give it 3 positions: OFF,
RUN, and START. The START position is spring loaded
so the cylinder automatically returns to RUN once the
key is released.
Rev. 000
Fig 0800 PICT-5260
TX525 Service Manual