HYDRAULIC SYSTEM
Tilt Cylinder Disassembly
1. Remove the piston wear ring from the ram assembly
(Fig. 1231).
2. Carefully remove the seal from the ram assembly
(Fig. 1232).
6-106
Fig 1231
PICT-2961
Fig 1232
PICT-2962
3. Remove the back-up piston seal from the ram
assembly (Fig. 1233).
4. Using a 1-1/2" socket, remove the nut from the ram
assembly (Fig. 1234).
Rev. 000
Fig 1233
PICT-2963a
Fig 1234
PICT-2964a
TX525 Service Manual