Belt Installation - Toro TX525 Service Manual

DRIVE SYSTEM
16. Rotate the hydraulic pump clockwise and pull the
hydraulic pump outward to separate the coupling
sleeve and the hub sleeve. This will permit belt
removal (Fig. 1287).
17. Remove the belt (Fig. 1288).
7-8
Fig 1287
Fig 1288

Belt Installation

1. Pull the hydraulic pump outward to create enough
clearance between the coupling sleeve and the hub
sleeve to allow for belt installation (Fig. 1289).
Belt 012
2. Install the belt onto the engine pulley and the right
and left hydraulic traction pump pulleys (Fig. 1290).
Belt 015
Rev. 000
Fig 1289
Fig 1290
TX525 Service Manual
Belt 015
Belt 014