Joystick Assembly Installation - Toro TX525 Service Manual

HYDRAULIC SYSTEM
7. Using a 13mm socket and wrench, remove the nut
holding the joystick joint and then remove the pivot
for the lift and tilt operation (Fig. 1111).
8. Turn the loader lift joystick joint. Using a 3mm Allen
wrench, remove the 2 hex head screws securing the
joystick pivot to the valve assembly (Fig. 1112).
6-74
Fig 1111 PICT-2596a
Fig 1112 PICT-2597
9. Remove the joystick pivot from the valve assembly
(Fig. 1113).

Joystick Assembly Installation

1. Apply thread locking compound on the threads
of both screws that secure the pivot to the valve
assembly (Fig. 1114).
Rev. 000
Fig 1113 PICT-2598a
Fig 1114 PICT-2599a
TX525 Service Manual