Tilt Cylinder Assembly - Toro TX525 Service Manual

HYDRAULIC SYSTEM

Tilt Cylinder Assembly

Note: Lubricate all parts during assembly.
1. Secure the cylinder ram into a vise.
2. Slide the head onto the cylinder ram (Fig. 1254).
3. Slide the piston onto the cylinder ram (Fig. 1255).
6-112
Fig 1254 PICT-2984a
Fig 1255 PICT-2985a
4. Install the nut onto the end of the ram. Using a 1-1/2"
socket, torque the nut to 110 - 120 ft-lbs. (149.1 -
162.7 Nm) (Fig. 1256).
5. Remove the ram from the vise and secure the
cylinder barrel into the vise.
6. Install the ram assembly into the cylinder barrel by
rotating the head assembly while pushing the head
into the barrel (Fig. 1257).
Rev. 000
Fig 1256 PICT-2986a
Fig 1257 PICT-2987a
TX525 Service Manual