Message Waiting Indicator (Mwi); Mwi For System Telephones - Siemens HiPath 1100 User Manual

Step by step
*91=PROG. FEATURE KEY?
CHANGE KEY?
MAILBOX?

Message Waiting Indicator (MWI)

The Message Waiting Indicator (MWI) is used in the
HiPath 1100 to help manage voice mail. With this fea-
ture when a mailbox (internal or external) receives a
new message, a signal or tone indicates that there is a
message waiting.
This indication is provided in the following manner:
• By means of a key programmed as a MWI, in the
case of system telephones.
• By means of an icon shown on the display, in the
case of Profiset 3030 system telephones or stan-
dard telephones with Caller ID (CLIP-FSK).
The signal indication is activated when the first mes-
sage is received in the mailbox. The indication is deacti-
vated automatically by the voice mail server.

MWI for system telephones

When there is a message in the user's mailbox, the key
configured will blink as an indication.
Programming a key as a MWI for the Internal Server
A programmable telephone key is assigned as an indi-
cator for a new message in the mailbox by using an in-
ternal voice mail server.
Press to access the Service menu.
Select and confirm.
or
qme
Enter the programming code a key.
Select a programmable key.
Confirm.
Select and confirm.
[1] When using an internal voice mail server, extensions must be pro-
grammed in the subscriber group to which voice mail was as-
signed (see Programming an extension - UCD subscriber group in
the programming manual).
When using an external voice mail server (contracted with a local
carrier), the extensions assigned to voice mail must be pro-
grammed and the service must be activated in the external MWI
group (see Programming an extension - External MWI group in the
programming manual).
[2] For system telephones without a display the signaling must be pro-
grammed using the HiPath 1100 System Manager application.
Functions used when receiving calls
2
1
67