Calling Multiple Parties Simultaneously
Step by Step
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
F=B:
22
Conducting a Conference
In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
C
Lift the handset.
D
Call the first party.
Press the key. LED flashes.
D
Call the second station. Announce the conference.
F<
Press the key. Enter the code. The LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress. Contact the service personnel for
instructions on how to turn it off.
If the second party does not answer:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Adding Up to Five to the Conference
(Initiator Only)
Press the key. LED flashes.
D
Call the new party. Announce the conference.
F<
Press the key. Enter the code. The LED goes out,
etc.
Leaving a Conference
I
Replace the handset.
Ending a Conference (Initiator Only)
G<
Press the key. LED flashes. Enter the code.
Removing the ISDN Central Office Party
From the Conference (Only for U.S.)
Press the key. LED flashes.
Enter the code.