Notify; Automatic Keypad - Siemens HiPath 1100 Programming Manual

Step by Step
*
, ,
0 1 0 2 0 3
*
0 0
ule, enter slot 11 and port 00... 04).
or
# Activate/Deactivate ACK setup:
= To activate
*
# = To deactivate (default)
Initial state for Programming Mode.

Notify

Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
0 7 6 Enter the code for programming.
or Enter the S
1 1
Enter the slot for the S
0 0
external line only - PP or PMP)
0 0
0 0
ule, enter Slot 11 and Port 00 ... 04).
or
# Activate/Deactivate Notify:
= To activate (default)
*
= To deactivate
#
Initial state for Programming Mode.

Automatic Keypad

Your local carrier can inform you which ISDN features
can be controlled by code in your country.
This feature allows you to activate the appropriate ISDN
function at the terminal, with no need for external ac-
cess.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 7
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
... 0 4 = For HiPath 1190 (for the second mod-
Module slot on the system
0
module slot:
0
... = On the HiPath 1120 (Port 00 slot is for
0 1
... = For HiPath 1150;
0 4
... = For HiPath 1190 (for the second mod-
0 4
Programming a Digital Trunk
1
.
141