Event Log Configuration Submenu; Table 3 - 18: Event Log Configuration Submenu - NEC Express 5800 120Eg User Manual

Table 3 - 17: Console Redirection Submenu (Continued)
Feature
Flow Control
Terminal Type
ACPI Redirection
Port

Event Log Configuration Submenu

Table 3 - 18: Event Log Configuration Submenu

Feature
Clear All Event Logs Disabled
BIOS Event Logging Disabled
Critical Event
Logging
ECC Event Logging
PCI Event Logging
FSB Event Logging
Hublink Error
Logging
120Eg User Guide - Configuring Your System
Choices or Description
Display Only
No Flow Control Select a flow control method.
XON/XOFF
CTS/RTS
CTS/RTS + CD
PC ANSI Specify the type of remote
VT100+ console.
VT-UTF8
Disabled Specify the serial port to which
Serial Port A an ACPI console is connected.
Serial Port B
Choices or Description
Display Only
Press Enter and select
Enabled "Enable" to initialize the system
event log.
Select "Enabled" to allow
Enabled logging of BIOS events.
Disabled Select "Enabled" to allow
Enabled logging of the critical system
errors. The critical system
errors are fatal to system
operations such as PERR,
SERR, ECC.
Disabled Select "Enabled" to allow
Enabled logging of ECC error events.
Disabled Select "Enabled" to allow
Enabled logging of PCI error events.
Disabled Select "Enabled" to allow
Enabled logging of Front Side Bus error
events.
Disabled Select "Enabled" to allow
Enabled logging of hublink error events.
3 - 15
Your Setting
Your Setting